RR Racing Road & Track Ultimate Steering Response System (USRS) for Lexus (Pair) with Grease Ports

We are excited to have designed and manufactured the new RR Racing Ultimate Steering Response System (USRS). USRS is an upgraded lower control arm (LCA) bushing and housing. It is not often that a product offers so much for such a reasonable price and easy installation!

Ever read magazine articles comparing Lexus and BMW's, filled with complaints about Lexus's lack of steering "feel?" Our goal with the Lexus LCA upgrade was to significantly improve steering feel and turn-in response. One of the problems with the Lexus front suspension is the soft rear control arm bushing. Not only does this bushing deflect laterally under load, but it also deflects fore/aft under braking, leading to imprecise and sometimes "wandering" steering feel caused by movement of the effective contact patch of the tire. All current aftermarket offerings address the lateral deflection, but do little to eliminate the fore/aft deflection that leads to dynamic toe changes under braking and cornering.

By eliminating excessive movement of the soft stock lower control arm bushing, we dramatically improved steering response and feel during hard cornering, without the excessive vibration and harshness associated with race-only hard spherical bearings. As illustrated in our image gallery, the OEM suspension control arms, under braking and cornering, actually move with respect to the chassis. This results in increased understeer, non-linear steering response, and reduced stability under hard braking conditions, and in many cases excessive inner tire wear, a well known problem on many Lexus models. We have designed our USRS to significantly reduce all dynamic toe changes and lateral deflections!

Please watch the video below for a detailed overview of USRS and on-car comparison between USRS and the Lexus OEM bushing.

Summary of Features:

• Our bushing virtually eliminates unwanted suspension movement, that lead to changes in toe, caster, and camber while turning and braking.
• Our redesigned housing increases static caster by 0.3-0.5 degrees. Increased caster improves steering feel and camber gain when cornering.
• Comes as a complete and assembled bushing & housing assembly - no costly labor and hassle in pressing out old OEM bushings.
• Redesigned 6061-T6 lower control arm housing designed to be stronger than OEM to withstand increased thrust loads.
• Extremely tough 88 durometer polyurethane bushing -- backed by our lifetime guarantee!
• Polyurethane bushing features fully fluted design on shaft and thrust side for enhanced lubrication. Also features end seal to keep dirt out.

All components in this product are proudly engineered and manufactured here in the United States of America.
Please click on one of the links below for more relevant detailed information about our approach to engineering great products for your Lexus:
RR Racing Lexus IS-F Project.

The following video has a short overview of USRS and comparison with the OEM lower control arm bushing: